UgCS license types and pricing*
Explore
Monthly
PAY-AS-YOU-GO
If you have any questions regarding UgCS send a message to ugcs@ugcs.com.
*All prices without VAT.
Supported Drones and Autopilots
UgCS currently supports DJI: Phantom 4/4 Pro, Phantom 3, Phantom 2, Inspire 2, Inspire 1/1 Pro/Raw, Mavic Pro/2 series, Spark, A3, N3, Matrice 600/600 Pro, Matrice 200/210/210RTK, Matrice 100, A2, Naza-M v2, WooKong-M; Ardupilot, Px4 and other MAVLink compatible multirotors, fixed wings and VTOLs; YUNEEC: H520; Mikrokopter; Micropilot; Microdrones; LockheedMartin: Kestrel, Indago.
Feature comparison
Fly zone limits for routes
Set boundaries for the flights to ensure that the drone does not fly too far away or higher than desired and allowed by local laws.
Immersive 3D mission planning environment
3D interface for mission planning enables precise route planning, taking into account any obstacles, e.g. terrain or buildings
Waypoints, Linear, Circle, Perimeter, Area Scan tool
UgCS offers tools to make aerial surveys and mapping as easy and effortless as possible
Photogrammetry tool
Choose one of the pre-installed camera profiles or create a new one for your payload. The Photogrammetry tools will automatically calculate the flight path based on camera settings. Parameters like overlap and altitude can be adjusted manually
Facade scan tool
The tool for vertical scanning allows to draw a vertical plane, specify the distance to the wall, as well as side and forward overlap. The optimal flying path is then calculated automatically. UgCS supports importing 3D object and custom DEM data with the terrain following function
KML/CSV data import
Import placemarks or import KML/CSV as route
DEM data import
To plan secure low altitude missions or flights with terrain following according to the DEM (digital elevation model) data
Geo-referenced images import
Import GeoTIFF images as map overlays for precise mission planning
Elevation profile
For calculated flight plans the elevation profile displays the altitude of the drone above ground and sea level for each waypoint
Terrain following
UgCS provides all tools for precise and secure mission planning with terrain following
Software emulator
Inbuilt software emulators for quadrocopters and fixed wing drones (i.e. emucopter and emuplane) to test a route before uploading to your drone
Battery change during long routes
UgCS enables to upload routes partially to drones, to fly longer routes with the possibility to stop the mission, change the battery and then continue the flight from where left off
Geotagging
The inbuilt geotagging tool of UgCS allows syncing the timestamps of images with the telemetry data recorded during the flight
Telemetry player
All telemetry data of the flight is being recorded and flights can be replayed, along with the videos recorded during the flight
UgCS Mapper
UgCS Mapper is a desktop geo-referenced image processing software designed to create offline 2D maps in minutes. In-field assembled map provides certainty for UAV surveyors that acquired images quality and density is sufficient. This information is crucial to decide whether the flight should be repeated before leaving surveying area.
Video recording
UgCS enables to display the video feed from the drone and also records it. The recordings can be replayed in the telemetry player.
Camera footprint
Option to display the camera's footprint on the surface of the ground.
Video streaming from UgCS for DJI to UgCS desktop
No-Fly zones - airport registry
Create custom NFZ
Create own custom no-fly zones (NFZ) where flights are prohibited - UgCS will automatically calculate flight path around NFZ areas and control that drone does not enter NFZ are while on an automated flight
ADS-B Receiver
Supported: microadsb; uAvionix pingRX and pingUSB
ADS-B Transponder
Supported: Sagetech XP
Multinode installation
UgCS software has a modular design, enabling that different parts of the software can run on different machines. UgCS consists of the UCS server, the client and VSMs (vehicle specific modules). UgCS ENTERPRISE enables to have a central ground station monitoring the work of multiple operators in the field.
SDK support
UgCS desktop client connections to UgCS Universal Control Server (UCS) enable adding 3rd party components or integration into complex solutions using UgCS SDK (e.g., like broadcast telemetry to cloud storage or create a drone swarm light-show). Enabled connections for UgCS PRO: up to 3 UgCS desktop software or UgCS SDK applications to single UCS. Each UgCS desktop client user should have own UgCS PRO license. UgCS ENTERPRISE: unlimited number of connections to single UCS. Each user should have own UgCS ENTERPRISE license.
Multi-drone support
UgCS enables to plan and fly multi-drone missions simultaneously
First year's support and update package
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
Annual Support & Update package (starting second year)
A perpetual licence covers upgrades and support for the first year. Starting from the second year of the activation date customer may buy Annual Support & Updated package. Paid Annual Support is not mandatory - UgCS will remain operational and data will be accessible after expiration of the support & update package date.
E-mail support
Phone support 8x5
UgCS PRO and UgCS ENTERPRISE licence users can get support via phone from UgCS engineers during our working hours: Mo-Fri 09:00-18:00 (UTC+02:00). This is applicable for customers with valid Support&Update package.
Support 24x7
UgCS OPEN
100m from first point, 120m AGL
experimental
can't be disabled
single
unlimited
included
35 USD
UgCS PRO
no limits
experimental
can be disabled
limited
unlimited
included
120 USD
UgCS ENTERPRISE
no limits
experimental
can be disabled
unlimited
unlimited
included
400 USD
Fly zone limits for routes
Set boundaries for the flights to ensure that the drone does not fly too far away or higher than desired and allowed by local laws.
Immersive 3D mission planning environment
3D interface for mission planning enables precise route planning, taking into account any obstacles, e.g. terrain or buildings
Waypoints, Linear, Circle, Perimeter, Area Scan tool
UgCS offers tools to make aerial surveys and mapping as easy and effortless as possible
Photogrammetry tool
Choose one of the pre-installed camera profiles or create a new one for your payload. The Photogrammetry tools will automatically calculate the flight path based on camera settings. Parameters like overlap and altitude can be adjusted manually
Facade scan tool
The tool for vertical scanning allows to draw a vertical plane, specify the distance to the wall, as well as side and forward overlap. The optimal flying path is then calculated automatically. UgCS supports importing 3D object and custom DEM data with the terrain following function
KML/CSV data import
Import placemarks or import KML/CSV as route
DEM data import
To plan secure low altitude missions or flights with terrain following according to the DEM (digital elevation model) data
Geo-referenced images import
Import GeoTIFF images as map overlays for precise mission planning
Elevation profile
For calculated flight plans the elevation profile displays the altitude of the drone above ground and sea level for each waypoint
Terrain following
UgCS provides all tools for precise and secure mission planning with terrain following
Software emulator
Inbuilt software emulators for quadrocopters and fixed wing drones (i.e. emucopter and emuplane) to test a route before uploading to your drone
Battery change during long routes
UgCS enables to upload routes partially to drones, to fly longer routes with the possibility to stop the mission, change the battery and then continue the flight from where left off
Geotagging
The inbuilt geotagging tool of UgCS allows syncing the timestamps of images with the telemetry data recorded during the flight
Telemetry player
All telemetry data of the flight is being recorded and flights can be replayed, along with the videos recorded during the flight
UgCS Mapper
UgCS Mapper is a desktop geo-referenced image processing software designed to create offline 2D maps in minutes. In-field assembled map provides certainty for UAV surveyors that acquired images quality and density is sufficient. This information is crucial to decide whether the flight should be repeated before leaving surveying area.
Video recording
UgCS enables to display the video feed from the drone and also records it. The recordings can be replayed in the telemetry player.
Camera footprint
Option to display the camera's footprint on the surface of the ground.
Video streaming from UgCS for DJI to UgCS desktop
No-Fly zones - airport registry
Create custom NFZ
Create own custom no-fly zones (NFZ) where flights are prohibited - UgCS will automatically calculate flight path around NFZ areas and control that drone does not enter NFZ are while on an automated flight
ADS-B Receiver
Supported: microadsb; uAvionix pingRX and pingUSB
ADS-B Transponder
Supported: Sagetech XP
Multinode installation
UgCS software has a modular design, enabling that different parts of the software can run on different machines. UgCS consists of the UCS server, the client and VSMs (vehicle specific modules). UgCS ENTERPRISE enables to have a central ground station monitoring the work of multiple operators in the field.
SDK support
UgCS desktop client connections to UgCS Universal Control Server (UCS) enable adding 3rd party components or integration into complex solutions using UgCS SDK (e.g., like broadcast telemetry to cloud storage or create a drone swarm light-show). Enabled connections for UgCS PRO: up to 3 UgCS desktop software or UgCS SDK applications to single UCS. Each UgCS desktop client user should have own UgCS PRO license. UgCS ENTERPRISE: unlimited number of connections to single UCS. Each user should have own UgCS ENTERPRISE license.
Multi-drone support
UgCS enables to plan and fly multi-drone missions simultaneously
First year's support and update package
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
Annual support and update starting second year
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
E-mail support
Phone support 8x5
UgCS PRO and UgCS ENTERPRISE licence users can get support via phone from UgCS engineers during our working hours: Mo-Fri 09:00-18:00 (UTC+02:00). This is applicable for customers with valid Support&Update package.
Support 24x7
UgCS OPEN
100m from first point, 120m AGL
experimental
can't be disabled
single
unlimited
included
35 USD
Fly zone limits for routes
Set boundaries for the flights to ensure that the drone does not fly too far away or higher than desired and allowed by local laws.
Immersive 3D mission planning environment
3D interface for mission planning enables precise route planning, taking into account any obstacles, e.g. terrain or buildings
Waypoints, Linear, Circle, Perimeter, Area Scan tool
UgCS offers tools to make aerial surveys and mapping as easy and effortless as possible
Photogrammetry tool
Choose one of the pre-installed camera profiles or create a new one for your payload. The Photogrammetry tools will automatically calculate the flight path based on camera settings. Parameters like overlap and altitude can be adjusted manually
Facade scan tool
The tool for vertical scanning allows to draw a vertical plane, specify the distance to the wall, as well as side and forward overlap. The optimal flying path is then calculated automatically. UgCS supports importing 3D object and custom DEM data with the terrain following function
KML/CSV data import
Import placemarks or import KML/CSV as route
DEM data import
To plan secure low altitude missions or flights with terrain following according to the DEM (digital elevation model) data
Geo-referenced images import
Import GeoTIFF images as map overlays for precise mission planning
Elevation profile
For calculated flight plans the elevation profile displays the altitude of the drone above ground and sea level for each waypoint
Terrain following
UgCS provides all tools for precise and secure mission planning with terrain following
Software emulator
Inbuilt software emulators for quadrocopters and fixed wing drones (i.e. emucopter and emuplane) to test a route before uploading to your drone
Battery change during long routes
UgCS enables to upload routes partially to drones, to fly longer routes with the possibility to stop the mission, change the battery and then continue the flight from where left off
Geotagging
The inbuilt geotagging tool of UgCS allows syncing the timestamps of images with the telemetry data recorded during the flight
Telemetry player
All telemetry data of the flight is being recorded and flights can be replayed, along with the videos recorded during the flight
UgCS Mapper
UgCS Mapper is a desktop geo-referenced image processing software designed to create offline 2D maps in minutes. In-field assembled map provides certainty for UAV surveyors that acquired images quality and density is sufficient. This information is crucial to decide whether the flight should be repeated before leaving surveying area.
Video recording
UgCS enables to display the video feed from the drone and also records it. The recordings can be replayed in the telemetry player.
Camera footprint
Option to display the camera's footprint on the surface of the ground.
Video streaming from UgCS for DJI to UgCS desktop
No-Fly zones - airport registry
Create custom NFZ
Create own custom no-fly zones (NFZ) where flights are prohibited - UgCS will automatically calculate flight path around NFZ areas and control that drone does not enter NFZ are while on an automated flight
ADS-B Receiver
Supported: microadsb; uAvionix pingRX and pingUSB
ADS-B Transponder
Supported: Sagetech XP
Multinode installation
UgCS software has a modular design, enabling that different parts of the software can run on different machines. UgCS consists of the UCS server, the client and VSMs (vehicle specific modules). UgCS ENTERPRISE enables to have a central ground station monitoring the work of multiple operators in the field.
SDK support
UgCS desktop client connections to UgCS Universal Control Server (UCS) enable adding 3rd party components or integration into complex solutions using UgCS SDK (e.g., like broadcast telemetry to cloud storage or create a drone swarm light-show). Enabled connections for UgCS PRO: up to 3 UgCS desktop software or UgCS SDK applications to single UCS. Each UgCS desktop client user should have own UgCS PRO license. UgCS ENTERPRISE: unlimited number of connections to single UCS. Each user should have own UgCS ENTERPRISE license.
Multi-drone support
UgCS enables to plan and fly multi-drone missions simultaneously
First year's support and update package
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
Annual support and update starting second year
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
E-mail support
Phone support 8x5
UgCS PRO and UgCS ENTERPRISE licence users can get support via phone from UgCS engineers during our working hours: Mo-Fri 09:00-18:00 (UTC+02:00). This is applicable for customers with valid Support&Update package.
Support 24x7
UgCS PRO
no limits
experimental
can be disabled
limited
unlimited
included
120 USD
Fly zone limits for routes
Set boundaries for the flights to ensure that the drone does not fly too far away or higher than desired and allowed by local laws.
Immersive 3D mission planning environment
3D interface for mission planning enables precise route planning, taking into account any obstacles, e.g. terrain or buildings
Waypoints, Linear, Circle, Perimeter, Area Scan tool
UgCS offers tools to make aerial surveys and mapping as easy and effortless as possible
Photogrammetry tool
Choose one of the pre-installed camera profiles or create a new one for your payload. The Photogrammetry tools will automatically calculate the flight path based on camera settings. Parameters like overlap and altitude can be adjusted manually
Facade scan tool
The tool for vertical scanning allows to draw a vertical plane, specify the distance to the wall, as well as side and forward overlap. The optimal flying path is then calculated automatically. UgCS supports importing 3D object and custom DEM data with the terrain following function
KML/CSV data import
Import placemarks or import KML/CSV as route
DEM data import
To plan secure low altitude missions or flights with terrain following according to the DEM (digital elevation model) data
Geo-referenced images import
Import GeoTIFF images as map overlays for precise mission planning
Elevation profile
For calculated flight plans the elevation profile displays the altitude of the drone above ground and sea level for each waypoint
Terrain following
UgCS provides all tools for precise and secure mission planning with terrain following
Software emulator
Inbuilt software emulators for quadrocopters and fixed wing drones (i.e. emucopter and emuplane) to test a route before uploading to your drone
Battery change during long routes
UgCS enables to upload routes partially to drones, to fly longer routes with the possibility to stop the mission, change the battery and then continue the flight from where left off
Geotagging
The inbuilt geotagging tool of UgCS allows syncing the timestamps of images with the telemetry data recorded during the flight
Telemetry player
All telemetry data of the flight is being recorded and flights can be replayed, along with the videos recorded during the flight
UgCS Mapper
UgCS Mapper is a desktop geo-referenced image processing software designed to create offline 2D maps in minutes. In-field assembled map provides certainty for UAV surveyors that acquired images quality and density is sufficient. This information is crucial to decide whether the flight should be repeated before leaving surveying area.
Video recording
UgCS enables to display the video feed from the drone and also records it. The recordings can be replayed in the telemetry player.
Camera footprint
Option to display the camera's footprint on the surface of the ground.
Video streaming from UgCS for DJI to UgCS desktop
No-Fly zones - airport registry
Create custom NFZ
Create own custom no-fly zones (NFZ) where flights are prohibited - UgCS will automatically calculate flight path around NFZ areas and control that drone does not enter NFZ are while on an automated flight
ADS-B Receiver
Supported: microadsb; uAvionix pingRX and pingUSB
ADS-B Transponder
Supported: Sagetech XP
Multinode installation
UgCS software has a modular design, enabling that different parts of the software can run on different machines. UgCS consists of the UCS server, the client and VSMs (vehicle specific modules). UgCS ENTERPRISE enables to have a central ground station monitoring the work of multiple operators in the field.
SDK support
UgCS desktop client connections to UgCS Universal Control Server (UCS) enable adding 3rd party components or integration into complex solutions using UgCS SDK (e.g., like broadcast telemetry to cloud storage or create a drone swarm light-show). Enabled connections for UgCS PRO: up to 3 UgCS desktop software or UgCS SDK applications to single UCS. Each UgCS desktop client user should have own UgCS PRO license. UgCS ENTERPRISE: unlimited number of connections to single UCS. Each user should have own UgCS ENTERPRISE license.
Multi-drone support
UgCS enables to plan and fly multi-drone missions simultaneously
First year's support and update package
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
Annual support and update starting second year
First years support and update package is included with initial purchase of perpetual license. Support is valid for one year starting from first activation.
E-mail support
Phone support 8x5
UgCS PRO and UgCS ENTERPRISE licence users can get support via phone from UgCS engineers during our working hours: Mo-Fri 09:00-18:00 (UTC+02:00). This is applicable for customers with valid Support&Update package.
Support 24x7
UgCS ENTERPRISE
no limits
experimental
can be disabled
unlimited
unlimited
included
400 USD
